About us
EXPERIENCE
Rabbit specializes in devices and systems for the control, monitoring and
supervision of outdoor lighting (street, road and architectural). Our devices control
outdoor lighting not only in the largest cities in Poland, but also in the cities of Lithuania, Latvia,
Estonia and Romania. For several years now, all street and road lighting in Warsaw, Krakow and other
Polish cities include our controllers. Our main advantage and a guarantee of the high quality of our
products is the experience and certificates: ISO9001:2008 and CE.
COMPLETE
SOLUTION
We offer our customers a complete solution for street lighting control:
• CPA
astronomical programmers and digiLUX digital photorelays to turn on the lighting
• Autonomous
power reducers in APC 2 sodium enclosures
• voltage regulators in street lighting
• system
cabinets for street lighting with power reduction
• control system
and controls CPAnet
CPA PROGRAMMERS
CPA digital astronomical programmers are very popular
products. In total, more than sixty thousand were sold
different types of CPA programmers. These devices are very willingly bought by Polish admins, because
the programmers limit the cost of electricity. The devices are also bought by energy companies.
sectors: due to convenient installation, simple operation and low accident rate.
ACHIEVEMENTS
CPA has won recognition at numerous trade shows. Our company received the first
Zlota Iskra award at Elektro-Expo - Warszawa and distinctions: Elektroinstalacje - Gdansk, Swiatlo -
Warszawa, Tarel - Wroclaw, Energia - Wroclaw. In 2009, the CPA 5RC programmer was chosen as the ELECTRIC
PRODUCT
2008, and the CPAnet system received the title of "Best Device of the ELECTROTECHNIKA 2010 Exhibition".
Digital Astronomical Programmer CPA6.0 won first place in the competition "Best Product of the
Exhibition
LIGHT 2012" as well as the "First Prize of the Polish Chamber of Engineers in the field of lighting". In
2013, the award for our product was again recognized.
"As the best product presented at the Exhibition of Electrical Engineering 2013».
CPA
net
LIGHTING REMOTE MONITORING SYSTEM
CPA net is a modern system for monitoring and
controlling external lighting via the www website using a computer or a portable mobile phone.
devices. Enables intelligent lighting control based on weather conditions and traffic.
Inside the
CPAnet programmer is a GPS receiver,
thanks to which the device calculates the optimal time for sunrise and sunset, depending on the
geographical location. GPS also provides accurate time, eliminating the need for periodic
device clock adjustments. After installing it in the lighting cabinet, the programmer is automatically
located on the site map www.
The CPAnet system consists of:
• programmer
CPAnet
• network analyzer
• 3 current transformers
• antennas (GPRS, GSM)
Each user after
entering his password and login on the site www.cpanet.pl can get acquainted with his
own lighting structure, while choosing a specific city, district or street. Using CPA net, we have the
possibility of preparing all kinds of analyzes and reports regarding lighting,
for example: power consumption, energy usage, alarm situations and network parameters. Possibility to
use the function "switch on the light by SMS".
Device properties
• Full control
and real-time management via www
• Communication: GPRS, SMS, CSD
• Automatic GPS time
synchronization and programmer configuration based on geographic location
• Analysis of network parameters: current, voltage, power, energy.
• Analysis of sudden situations
(alarm triggering), their archiving
• Remote exchange of program and parameters
via GPRS (free of charge for 24 months)
• Location of programmers on the map and management of groups
of programmers
CPA
5rc
DIGITAL ASTRONOMIC PROGRAMMER
The CPA 5rc programmer is a smart programmer for street
lighting control with a very precise quartz clock inside which has
function of automatic change of winter/summer time. You can change the program using the remote control,
which sends data to the programmer via radio, so there is no need to open
locker. The CPA 5rc programmer has 2 independent programmable outputs and an additional programmable
output for two tariff meters. Can work with photorelay. Has an additional
event logging function, also registers the absence of power. This function allows the consumer to
analyze the operation of the lighting network..
PS
5RC
REMOTE CONTROL
The PS5rc console enables remote collaboration with the CPA5 rc programmer
group. Sends data to the CPA5rc programmer via radio, so that
you don't even have to open the electrical cabinet. But with programmers CPA3.1 and CPA 4.0 communicates
with the help of infrared rays IR. The range of such a connection is several tens of meters in an open
space and depends on some external conditions (interference in the 2.4GHz band), but practically does
not decrease in the region of 10-20 meters, which is absolutely sufficient in the above use. By using
As a pilot, you can very easily enter all the necessary instructions to the controller, read data from
the registration, send control commands, etc. One pilot can serve unlimited
the number of controllers, it is only important that the controllers that work side by side have
different addresses for identifying devices in the network.
Digital
Astronomical
CPA 5RC GPS Programmer
The CPA 5rc Programmer is a state of the art programmer
for controlling street lighting with an accurate quartz clock inside that has a function
automatic change of winter/summer time. The program can be changed using the remote control, which sends
data to the programmer via radio, so there is no need to open the locker.
CPA
4.0
DIGITAL ASTRONOMIC PROGRAMMER
CPA 4.0 is a special programmer designed to control street
lighting and with its help the consumer can reduce costs
for lighting according to your requirements. Turning the lighting on and off occurs in accordance with
the table of sunrises and sunsets, as well as the amendments specified by the consumer. Has a function
automatic change of winter/summer time. Properly installed and programmed in a street lighting cabinet,
the CPA4.0 does not require additional visits from electricians. Controls lighting
in an annual cycle, no need to change the parameters every month, quarter, year, etc. The program that
is inside the programmer is not eliminated even during a power outage. Programming
CPA4.0 is possible using the keypad on the programmer or the PS-5rc remote control (using infrared
rays). The remote control is not required, but it greatly simplifies the maintenance of the CPA. With
it, you can
change the settings of the programmer or, by pressing just one button, send a previously prepared
program. The remote control memory holds 10 different programs. With the remote control, you can quickly
calculate the operating time
lamps for a year, as well as lock the keypad in the programmer so that no outsider can make any changes.
Reducer
GreenBOX
The GreenBoX reducer is a modern device designed to save energy in lighting lines. The
transformer method used in GreenBoX to reduce voltage, and
power also makes it possible to save energy, regardless of the type of lamps (except LEDs), does not
adversely affect the operation of lighting. No harmonic interference due to
reduction method.
Attractive price of the device allows you to achieve a quick return on
investment, even at the level of 1 year.
SSOU
STREET LIGHTING SYSTEM CABINET
SSOU is a modern solution for large cities that allows easy and
convenient control of street lighting. Additionally, with cabinets
SSOU can significantly reduce street lighting costs. The design of the cabinet consists of a body
divided into 3 sections with separate doors and locks:
1. measuring section
2. distribution
section
3. power reduction section
Thanks to the modern control system with CPAnet programmer and
power reducer, it is possible to obtain an excellent solution that fully meets all
European standard. Thanks to the possibility of remote program replacement, this solution is flexible
and can be adapted to the requirements of each client..
APC-2
PROGRAMMED STAND-ALONE RELAY FOR STREET LIGHTS
APC-2 is designed to control the power of a single
street lamp. The unique property of the device is the ability
determination of the actual time by analyzing the history of switching on the lighting. Works in lamps
with a special choke with a double winding. The start time of the reduction and the time it continues
can be
set with a resolution of 30 minutes. Switching in fixtures that are powered from the same network occurs
simultaneously with an accuracy of 1 second. ARS-2 is mounted at the stage of luminaire production
or when it is serviced in the workshop.
APC-2
PROGRAMMER FOR AUTONOMOUS POWER REDUCTION RELAY IN LIGHT
APC-2 prog is a microprocessor
programmer that serves for easy reprogramming of street lamps with APC-2. After
connection in the lighting cabinet, simultaneously programs all lamps with APC-2 relays that are
connected to this network. Programming of fixtures is carried out by successive switching off
and turning on the voltage.
The device programs the power reduction turn-on time in the range
from 15:00 to 08:00 (with an interval of 0.5 hours) and the time for continuing the reduction from 0-16
hours (with an interval
0.5 hours). Allows you to select the appropriate reduction time, depending on the requirements of the
consumer
DigiLUX
DIGITAL PHOTO RELAY
Digital photo relay digiLUX is designed to control lighting: streets,
manufacturing plants, industrial premises. DigiLUX works on its own, but
can be an addition to the CPA digital programmer. digiLUX enables accurate, and therefore economical,
switching on and off of lighting according to the threshold setting, with an accuracy of 1 lux. Setting
carried out using the keys. The device consists of two parts: the first serves for measurements, and the
second is a photosensitive element.
digiLUX automatically recognizes when connected
measuring element to it and whether it is working. It has the function of ignoring random changes in
light intensity, that is, it analyzes the light intensity for a minute, and only after
This turns the lighting off or on. Thanks to this function, you can reduce the number of brief on / off.
(e.g. briefly illuminating the photocell with the headlights of a car could lead to turning off
street lighting at night).
TZ-2
INSTRUMENT FOR CHECKING ELECTRONIC SYSTEMS IN SODIUM LIGHT
TZ-2 is a universal device for
testing electronic ignition systems in sodium lamps (it can be used in lamps
threaded E27 and E40). Connects at the point of the light source with a simple connection without
thread.